MP Sub Engineer Electrical Engineering Syllabus 2026-27: Subject-Wise Topics & Books

Candidates preparing for the MPESB Group-3 Sub Engineer and Other Post Combined Recruitment Test 2026 should check the MP Sub Engineer Electrical Engineering Syllabus 2026-27 before starting their preparation. The examination is scheduled for 20 January 2027.

The Electrical Engineering technical section is important for candidates applying for relevant electrical posts. Preparation should cover core diploma-level subjects such as Electrical Circuits, Electrical Machines, Power Systems, Electrical Measurements, Basic Electronics, Power Electronics and Control Systems.

The examination also includes a general section covering subjects such as General Knowledge, Hindi, English, Mathematics, Reasoning, Science and Computer Knowledge. Candidates should prepare both sections to make their study plan balanced.

Also, Read:

Table of Contents

MP Sub Engineer Electrical Engineering Syllabus 2026-27: Overview

Particular	Details
Conducting Body	Madhya Pradesh Employees Selection Board (MPESB)
Exam Name	Group-3 Sub Engineer and Other Post Combined Recruitment Test 2026
Post/Discipline	Sub Engineer – Electrical Engineering
Exam Date	20 January 2027
Exam Mode	Computer-Based Test (CBT)
Total Marks	200
General Section	100 Marks
Technical Section	100 Marks
Technical Subject	Electrical Engineering
Official Website	esb.mp.gov.in

Candidates should verify the technical paper applicable to their post code in the latest revised MPESB rulebook. Different technical disciplines are linked to different post codes.

MP Sub Engineer Electrical Exam Pattern 2026-27

The examination has two broad sections: Part A (General Subjects) and Part B (Technical Subject). The general section carries 100 marks, while the Electrical Engineering technical section carries 100 marks.

Section	Subject	Marks
Part A	General Knowledge	100
	General Hindi
	General English
	General Mathematics
	General Reasoning
	General Science
	General Computer Knowledge
Part B	Electrical Engineering	100
Total	General + Technical	200

Note: Candidates should refer to the latest revised rulebook for the confirmed duration, question distribution and marking scheme. The table above shows the broad section-wise marks distribution.

MP Sub Engineer Electrical Syllabus 2026-27: Part A – General Subjects

Part A is common in nature and should be included in the preparation plan of Electrical Engineering candidates.

1. General Knowledge

Indian History
Indian Geography
Indian Constitution and Polity
Indian Economy
Current Affairs
General Awareness
Madhya Pradesh History and Geography
Madhya Pradesh Culture and Heritage
Important Government Schemes
Important national and international events

2. General Hindi

हिंदी व्याकरण
संधि और समास
पर्यायवाची और विलोम शब्द
उपसर्ग और प्रत्यय
मुहावरे और लोकोक्तियाँ
वाक्य शुद्धि
शब्द शुद्धि
अनेकार्थी शब्द
गद्यांश

3. General English

English Grammar
Vocabulary
Synonyms and Antonyms
Sentence Correction
Error Detection
Tenses
Articles and Prepositions
Active and Passive Voice
Direct and Indirect Speech
Reading Comprehension

4. General Mathematics

Number System
Simplification
Percentage
Ratio and Proportion
Average
Profit and Loss
Simple and Compound Interest
Time and Work
Time, Speed and Distance
Mensuration
Basic Algebra
Data Interpretation

5. General Reasoning

Analogy
Classification
Number Series
Alphabet Series
Coding-Decoding
Blood Relations
Direction Sense
Ranking and Order
Syllogism
Venn Diagrams
Logical Puzzles

6. General Science

Basic Physics
Basic Chemistry
Basic Biology
Everyday Science
Scientific Instruments
Environment and Ecology
Basic scientific concepts

7. General Computer Knowledge

Computer Fundamentals
Hardware and Software
Input and Output Devices
Operating Systems
MS Office
Internet and Email
Computer Networks
Cyber Security Basics
Digital Services

MP Sub Engineer Electrical Technical Syllabus 2026-27: Part B

The Electrical Engineering technical section carries 100 marks. Candidates should revise fundamental concepts, electrical laws, circuit calculations, machines, power systems and electrical measurements.

Syllabus clarification: The following list is a preparation guide based on standard diploma-level Electrical Engineering subjects. It should not be treated as a verbatim chapter-wise MPESB syllabus. Candidates must check the latest rulebook and their applicable post code for the official examination requirements.

1. Basic Electrical Engineering

Fundamental electrical quantities
Electric current, voltage and resistance
Ohm’s Law
Kirchhoff’s Current Law (KCL)
Kirchhoff’s Voltage Law (KVL)
Electrical power and energy
Series and parallel circuits
Resistance and resistivity
Magnetic circuits
Electromagnetic induction
Faraday’s laws
Lenz’s law
Electrical safety and basic wiring

2. Electrical Circuit Theory

Network elements
Active and passive components
DC circuit analysis
AC circuit fundamentals
Series and parallel AC circuits
Network theorems
Thevenin’s theorem
Norton’s theorem
Superposition theorem
Maximum power transfer theorem
Transient response
Resonance in electrical circuits
Three-phase circuits
Power factor and power factor correction

3. Electrical Engineering Materials

Conducting materials
Insulating materials
Magnetic materials
Semiconductor materials
Properties and applications of electrical materials
Dielectric materials
Magnetic circuits and applications
Basic material selection for electrical equipment

4. Electrical and Electronic Measurements

Measurement fundamentals
Accuracy and precision
Measurement errors
Ammeter and voltmeter
Wattmeter
Energy meter
Power factor meter
Moving-coil instruments
Moving-iron instruments
Instrument transformers
Digital measuring instruments
Bridges and potentiometers
Measurement of electrical power and energy

5. Electrical Machines

Working principles of electrical machines
DC generators
DC motors
Characteristics of DC machines
Starting and speed control of DC motors
Transformers
Single-phase transformers
Three-phase transformers
Transformer losses and efficiency
Induction motors
Three-phase induction motors
Single-phase induction motors
Synchronous generators
Synchronous motors
Alternators
Motor applications and maintenance

6. Power Generation

Conventional power generation
Thermal power plants
Hydroelectric power plants
Nuclear power generation
Gas-based power plants
Renewable energy sources
Solar power generation
Wind energy
Basic power station components
Load and demand concepts

7. Transmission and Distribution of Electrical Power

Transmission system fundamentals
Transmission line parameters
Overhead transmission lines
Underground cables
Insulators
Conductors
Cable insulation
Substations
Distribution systems
Radial and ring-main distribution
Voltage regulation
Power losses
Earthing and grounding
Electrical protection fundamentals

8. Power System Protection

Protective relays
Overcurrent protection
Earth fault protection
Differential protection
Circuit breakers
Fuses
Isolators
Lightning protection
Protective devices used in substations
Basic concepts of electrical fault analysis

9. Power Electronics

Semiconductor devices
Diodes
Bipolar junction transistors
MOSFETs
IGBTs
Thyristors
SCR characteristics
Rectifiers
Controlled rectifiers
Inverters
Choppers
AC voltage controllers
Power electronic converters
Applications of power electronics

10. Electrical Drives

Fundamentals of electric drives
Types of electric drives
DC motor drives
AC motor drives
Starting and braking methods
Speed control of electrical motors
Industrial applications of drives
Selection and maintenance of drives

11. Basic Electronics Engineering

Semiconductor fundamentals
PN junction diode
Zener diode
Rectifier circuits
Transistors
Amplifiers
Oscillators
Operational amplifiers
Digital electronics fundamentals
Logic gates
Boolean algebra
Flip-flops and counters
Basic electronic circuits

12. Control Systems

Basic control system concepts
Open-loop and closed-loop systems
Feedback principles
Transfer functions
Block diagrams
Signal flow graphs
Time response
Stability concepts
Basic controllers
Industrial control applications

13. Electrical Wiring, Installation and Maintenance

Domestic wiring
Industrial wiring
Electrical installation
Wiring accessories
Electrical safety
Earthing systems
Testing of electrical installations
Maintenance of electrical equipment
Electrical fault identification
Safety procedures and protective equipment

14. Utilisation of Electrical Energy

Electric heating
Electric welding
Electric traction
Illumination engineering
Lighting systems
Electrical drives in industries
Energy conservation
Power factor improvement
Energy-efficient equipment

15. Renewable Energy and Smart Grid Fundamentals

Solar photovoltaic systems
Solar power generation
Wind energy systems
Battery storage
Renewable energy integration
Smart grid fundamentals
Energy management
Basic concepts of distributed generation

Important Topics for MP Sub Engineer Electrical Exam 2027

The following subjects are useful priorities for technical revision. They are not an official question-weightage list.

Subject	Important Areas
Basic Electrical Engineering	Ohm’s Law, KCL, KVL and electrical power
Circuit Theory	Network theorems, AC circuits and resonance
Electrical Machines	Transformers, DC machines and induction motors
Power Systems	Generation, transmission and distribution
Electrical Measurements	Measuring instruments and electrical energy
Power Electronics	Rectifiers, inverters, converters and SCR
Control Systems	Transfer functions and feedback systems
Protection	Relays, circuit breakers and earthing
Basic Electronics	Diodes, transistors and logic gates
Electrical Installation	Wiring, testing and electrical safety

How to Prepare for MP Sub Engineer Electrical Exam 2026-27

Candidates should use a structured preparation plan to cover both the general and technical sections.

Check the applicable technical paper: Confirm the Electrical Engineering paper against your post code in the revised rulebook.
Revise electrical fundamentals: Start with Ohm’s Law, Kirchhoff’s laws, AC/DC circuits and basic electrical calculations.
Focus on electrical machines: Understand the working principles, characteristics, losses and applications of transformers, DC machines and induction motors.
Practise numerical problems: Solve questions on circuits, power, energy, machines, measurements and power systems.
Prepare the general section: Give regular time to General Knowledge, Hindi, English, Mathematics, Reasoning, Science and Computer Knowledge.
Make short revision notes: Maintain separate notes for formulas, definitions, electrical symbols, units and important concepts.
Practise mock tests: Attempt timed practice tests and review incorrect answers to identify weak topics.

Best Books and Study Material for MP Sub Engineer Electrical Engineering 2026-27

MP Sub Engineer Electrical Engineering Syllabus 2026-27 - FAQs

What is the MP Sub Engineer Electrical Engineering Syllabus 2026-27?

The preparation guide covers Basic Electrical Engineering, Circuit Theory, Electrical Machines, Power Systems, Electrical Measurements, Power Electronics, Control Systems, Basic Electronics and other diploma-level subjects.

How many marks are allotted to the Electrical Engineering section?

The technical section carries 100 marks. The general section carries another 100 marks, making the total examination worth 200 marks.

When is the MP Sub Engineer Electrical exam?

The examination is scheduled for 20 January 2027.

Which Electrical Engineering subjects should I prepare first?

Start with Basic Electrical Engineering, Circuit Theory, Electrical Machines, Power Systems and Electrical Measurements. Also prepare the general section regularly.